Brands Carried at CNY Farm Supply in Cortland, NY

2024 Land Pride OFM3698

Call for Price

Call for Price

Overview

Availability Brochure
Year2024
MakeLand Pride
ModelOFM3698

Product Features

Description

The OFM36 Series Offset Flail Mowers hydraulically offset to the right 49" - the offset is measured from the center of the tractor to the drive belt cover. The offset allows for mowing along fences, buildings, or under trees.

Features
  • Multiple cutting width 98 (250 cm)": Wide selection of cutting widths to meet specific applications.
  • Wide range of tractor horsepower 70 hp to 130 hp (52 kW to 75 kW): Fits a large array of tractors to meet the needs of consumers, municipalities, and landscapers.
  • Spring-loaded, belt-tensioning system: Belt tensioner system brings the belt to proper tension by turning a jam nut. Makes maintaining proper belt tension easy, and increases belt life.
  • High blade cutting capacity: Hammer blade can cut up to 2" (5 cm) brush and small saplings.
  • Reverse rotor rotation: Brings the cut material up and over the rotor which allows it to be dispersed more evenly. Allows material to be shredded completely.
  • High blade tip speed: Creates a vacuum effect, provides a clean cut, and slices through saplings with great force.
  • Five drive belts: Five drive belts distributes the load evenly, which prevents the belts from jumping off the drive when a shock load occurs.
  • Offset right: The lateral arm allows the mower to be offset 49" (125 cm) to the right for a closer cut alongside buildings, fences, and roadsides. It also allows the mower to be cutting in a ditch with the tractor traveling along side the ditch.
  • Flail head can be rotated from horizontal to 65° uo or down: Allows mowing along banks and in ditches without putting the tractor on steep inclining or declining surfaces.
  • Counter-blade (accessory): Assist shredding material into fine particles.
  • Replaceable skid shoes: Prevents wear on end panels from ground contact.
  • Adjustable roller: Provides precision cutting height between 1" and 2 3/4" (25 cm to 70 cm).
Specifications
  • Minimum horsepower: 75 HP (56 kW)
  • Maximum horsepower: 130 HP (97 kW)
  • Hitch category: Cat. II
  • Driveline category: Cat 3
  • Gearbox oil capacity: 12.7 pt (1.2 L) of SAE 80-90 w EP gear lube
  • Width (W): 122 in. (310 cm)
  • Depth (D): 80 in. (204 cm)
  • Height (H): 45 in. (113 cm)
  • Weight (without driveline): 2,205 (1000 cm)
  • Working width: 98 in. (250 cm)
  • End panel thickness: 3/8 in. (10 mm)
  • Deck thickness: 8 gauge (4 mm)
  • Offsets Right: Refer to Figure 5-2 below Offset (R) = 49 in. (125 cm)
  • Flail head rotation angle: 65 deg. up or down
  • Cutting capacity: 2 in. (5 cm)
  • Roller adjustable cutting height: 1 in. - 2 3/4 in. (25 - 70 cm)
  • Power take-off rotation speed: 540 rpm
  • Blade tip speed: 8460 fpm (2579 mpm)
  • Rotor speed: 1858 rpm
  • Rotor shaft diameter: 2 in. (5 cm)
  • Rotor diameter: 6.5 in. (16.5 cm)
  • Rotor swing diameter: 18 in. (46 cm)
  • Number of hammer blades: 32
  • Number of drive belts: 5
  • Minimum base tractor weight: 6,900 lb. (3,130 kg)

General

Working Width 98 in. (250 cm)
Width 122 in. (310 cm)
Weight 2,205 lb. (1000 kg)
Recommended HP 75 HP (56 kW)

Shopping Tools