Brands Carried at CNY Farm Supply in Cortland, NY
2024 Land Pride OFM3678
Call for Price
Overview
Availability
Brochure
Year2024
MakeLand Pride
ModelOFM3678
Product Features
Description
The OFM36 Series Offset Flail Mowers hydraulically offset to the right 49" - the offset is measured from the center of the tractor to the drive belt cover. The offset allows for mowing along fences, buildings, or under trees.
Features
- Wide range of tractor horsepower 75 hp to 130 hp (56 kW to 75 kW): Fits a large array of tractors to meet the needs of consumers, municipalities, and landscapers.
- Multiple cutting width 78": Wide selection of cutting widths to meet specific applications.
- Spring-loaded, belt-tensioning system: Belt tensioner system brings the belt to proper tension by turning a jam nut. Makes maintaining proper belt tension easy, and increases belt life.
- High blade cutting capacity: Hammer blade can cut up to 2" (5 cm) brush and small saplings.
- Reverse rotor rotation: Brings the cut material up and over the rotor which allows it to be dispersed more evenly. Allows material to be shredded completely.
- High blade tip speed: Creates a vacuum effect, provides a clean cut, and slices through saplings with great force.
- Five drive belts: Five drive belts distributes the load evenly, which prevents the belts from jumping off the drive when a shock load occurs.
- Offset right: The lateral arm allows the mower to be offset 49" (125 cm) to the right for a closer cut alongside buildings, fences, abd roadsides. It also allows the mower to be cutting in a ditch with the tractor traveling along side the ditch.
- Counter-blade (accessory): Assist shredding material into fine particles.
- Flail head can be rotated from horizontal to 65° uo or down: Allows mowing along banks and in ditches without putting the tractor on steep inclining or declining surfaces.
- Replaceable skid shoes: Prevents wear on end panels from ground contact.
- Adjustable roller: Provides precision cutting height between 1" and 2 3/4" (25 cm to 70 cm).
Specifications
- Minimum horsepower: 75 HP (56 kW)
- Maximum horsepower: 130 HP (97 kW)
- Hitch category: Cat. II
- Driveline category: Cat 3
- Gearbox oil capacity: 12.7 pt (1.2 L) of SAE 80-90 w EP gear lube
- Width (W): 102 in. (260 cm)
- Depth (D): 80 in. (204 cm)
- Weight (without driveline): 1,985 (900 cm)
- Height (H): 45 in. (113 cm)
- Working width: 78 in. (200 cm)
- Deck thickness: 8 gauge (4 mm)
- End panel thickness: 3/8 in. (10 mm)
- Offsets Right: Refer to Figure 5-2 below Offset (R) = 49 in. (125 cm)
- Cutting capacity: 2 in. (5 cm)
- Flail head rotation angle: 65 deg. up or down
- Roller adjustable cutting height: 1 in. - 2 3/4 in. (25 - 70 cm)
- Power take-off rotation speed: 540 rpm
- Rotor speed: 1858 rpm
- Blade tip speed: 8460 fpm (2579 mpm)
- Rotor shaft diameter: 2 in. (5 cm)
- Rotor diameter: 6.5 in. (16.5 cm)
- Rotor swing diameter: 18 in. (46 cm)
- Number of hammer blades: 26
- Number of drive belts: 5
- Minimum base tractor weight: 6,900 lb. (3,130 kg)
General
Working Width | 78 in. (200 cm) |
Width | 102 in. (260 cm) |
Weight | 1,985 lb. (900 kg) |
Recommended HP | 75 HP (56 kW) |