Brands Carried at CNY Farm Supply in Cortland, NY

2024 Land Pride OFM2660

Call for Price

Call for Price

Overview

Availability Brochure
Year2024
MakeLand Pride
ModelOFM2660

Product Features

Description

The OFM26 Series Offset Flail Mowers hydraulically offset to the right either 22" or 49" - the offset is measured from the center of the tractor to the drive belt cover. The offset allows for mowing along fences, buildings, or under trees.

Features
  • Multiple cutting Width: 60" (155 cm): Wide selection of cutting widths to meet specific applications.
  • Wide range of tractor horsepower 7 hp to 130 hp (56 kW to 97 kW): Fits large array of tractors to meet the eeds of consumers, municipalities, and landscapers.
  • Spring-loaded, belt-tensioning system: Belt tensioner system brings the belt to proper tension by turning a jam nut. Makes maintaining proper belt tension easy, and increases belt life.
  • High blade cutting capacity: Hammer blade can cut up to 2" (5 cm) brush nd small saplings.
  • Reverse rotor rotation: Brings the cut material up and over the rotor wich allows it to be dispersed more evenly. Allows material to be shredded completely.
  • High blade tip speed: Creates a vacuum effect, provides a clean cut, and slices through saplings with great force.
  • Five drive belts: Five drive belts distributes the load evenly, wich prevents the belts from jumping off the drive when a shock load occurs.
  • Offset riight: The lateral arm allows the mower to be offset to the right 22 1/2" (57 cm) for a closer cut alongside buildings, fences, and roadsides. It also allows the mower to be cutting in a ditch with the tractor traveling along side the ditch.
  • Counter-blade (accessory): Assist shredding material into fine particles.
  • Flail head can be rotated from horizontal to 65° up or down: Allows mowing along banks and in ditches without putting the tractor on steep inclining or declining surfaces.
  • Replaceable skid shoes: Prevents wear on end panels from ground contact.
  • Adjustable roller: Provides precision cutting height between 1" and 2 3/4" (25 cm to 70 cm)
Specifications
  • Minimum horsepower: 75 hp (56 kW)
  • Maximum horsepower: 130 hp (97 kW)
  • Minimum base tractor weight: 6,900 lbs (3,130 kg)
  • Hitch category: Cat. II
  • Driveline category: Cat 3
  • Gearbox oil capacity: 12.7 pt (1.2 L) of SAE 80-90 w EP gear lube
  • Overall Width: 72" (182 cm)
  • Overall Depth: 85" (215 cm)
  • Overall Height: 50" (126 cm)
  • Weight (without driveline): 1,631 b. (740 kg)
  • Working width: 61" (155 cm)
  • Deck thickness: 8 gauge (4 mm)
  • End panel thickness: 3/8" (10 mm)
  • Offsets Right: 22 1/2" (57 cm)
  • Flail head rotation angle: 65 deg. up or down
  • Cutting capacity: 2" (5 cm)
  • Roller adjustable cutting height: 1" - 2 3/4" (25 - 70 cm)
  • Power take-off rotation speed: 540 rpm
  • Rotor speed: 1800 rpm
  • Rotor shaft diameter: 2" (5 cm)
  • Blade tip speed: 8460 fpm (2579 mpm)
  • Rotor diameter: 6.5" (16.5 cm)
  • Rotor swing diameter: 18" (46 cm)
  • Number of hammer blades: 20
  • Number of drive belts: 5

General

Working Width 61in. (155 cm)
Width 72 in. (182 cm)
Weight 1,631 lb. (740 kg)
Recommended HP Minimum: 75 HP (56 kW); Maximum: 130 HP (97 kW)

Shopping Tools